Troubleshooting; Cleaning And Maintenance - PROZIS CHARGR Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
EN
User manual
PACKAGE CONTENTS
• 1 × Chargr - Car Charger
• 1 × Quick Guide
PRODUCT DESCRIPTION: SEE PAGE 2
1. Connection points
2. USB-C port
3. QC3.0 USB port

CLEANING AND MAINTENANCE

• Always disconnect the device from the power outlet when it's not in use and before clean-
ing.
• To avoid irreparable damage to the device, make sure no moisture enters the device
during cleaning.
• When cleaning the components, never use aggressive or abrasive cleaning agents or mate-
rials such as scouring milk or steel wool. These can damage the surface of the device.
• If necessary, clean the device with a soft, dry cloth. Use a lightly moistened cloth and a mild
detergent to remove stubborn dirt.
STORAGE
• The temperatures inside the vehicle can reach extreme values in both summer and winter.
To prevent heat damage, do not leave the device inside the vehicle.
• When no longer using the device, store it in a dry environment, away from dust and direct
sunlight.
• Store your device in the original packaging.
HOW TO USE:
• Start your car.
• Plug the USB car charger into your car's auxiliary power outlet.
• Connect the device you want to charge to one of the charger's USB outputs using an
appropriate USB cable. Your device will now be charged.
Notes:
1. Some cars can provide power to the auxiliary outlet even when the car is not started. This
means your car battery will be drained if the charger is left in the socket while the car is not
in use.
2. The charger is equipped with a fuse. To prevent damage to your car or your mobile de-
vice, this fuse will break in case of power overload.
6

TROUBLESHOOTING

Some issues that arise may be solved by the user. If the problem persists after having tried
the following solutions, please contact Prozis customer service.
PROBLEM
CAUSE
The connected device will
No connection to the car's
not charge (the charging
auxiliary power supply.
indicator LED does not light
up).
Depending on the type of
vehicle, it is possible that the
ignition must be switched
on first.
The fuse is defective.
Warranty statement
All electrical and electronic products commercialized by Prozis via www.prozis.com are cov-
ered by the warranty applicable to the purchase and sale of consumer goods.
GENERAL CONSIDERATIONS
This document contains the terms and conditions of Prozis' warranty for final consumers.
This warranty is valid exclusively for consumers who purchase the product for non-profession-
al purposes.
WARRANTY PERIOD
Prozis guarantees the product is to remain free from material and production defects for a
2-year period, counting from the date of initial purchase by a consumer and respective deliv-
ery, or for longer if legally established by the applicable national law.
In the event that repair is required, this 2-year period is suspended during repair time.
CONSUMABLES
The gradual performance decrease caused by prolonged use of the product's consumable
components, such as batteries, is not covered by this warranty unless the malfunction is
caused by faulty design, materials or production.
EN
SOLUTION
Check if all plugs are correct-
ly in place.
Turn on the ignition.
Check the state of the fuse
and replace it if necessary.
7
Tabla de contenido

Solución de problemas

loading

Tabla de contenido