Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USING THE MP3 PLAYER
1. Turn the ON/OFF power switch (15) to position ● to switch the system to standby mode.
2. To turn the unit on hold for a few seconds the button (4); the unit will activate the standby function.
3. Adjust the overall volume using its control (7).
4. Adjust the treble and bass through its controls (8 e 9).
5. To allow the unit to stand-by mode, press and hold for a few seconds the button (4).
6. To completely turn off the unit, press the ON/OFF power switch (15).
RADIO FUNCTION
1. Connect the antenna wire (supplied) connector to the socket (12).
2. Turn on the unit and hold for a few seconds the button (4); the unit will activate the standby function.
3. Hold for a few seconds(3) button, repeat the process until you select the RADIO (Pink color LED
function).
4. Carry out the tuning and auto store radio stations by pressing the button(3); the unit will automatically
scan all the available radio stations and store. To recall stations in memory press the (2) or (4).
NOTE: For the best FM reception, extend and turn the aerial. If the reception is not good try adjusting unlike the
antenna, however, the quality of the FM reception depends on the place where you place the unit.
MP3 PLAYER
1. Insert an SD Memory Card SD in the lobby (1) or a USB device into the USB port (5). The playback will
start automatically.
2. Press the(3) button to stop playback. Press again to restart.
3. Press the (2) or (4) to move to the next or previous track.
4. Press and hold the button for a few seconds(3) to switch between USB and SD inputs (TF card) if
both memories are inserted.
AUDIO INPUT USE
1. Connect the RCA connectors of an audio cable to the AUDIO INPUT input (13) of amplified speaker and
the jack plug to the headphone jack or line-out output of an audio source (TV/Monitor, T ablet, smartphone,
MP3 players, DVD/Mepg4 players, computers, etc...).
2.
Press and hold for a few seconds(3) button, repeat the process until you select the AUDIO INPUT
function (Red color LED).
NOTE: it is advisable not to set too high a volume for the audio source does not overdrive the input of the speakers.
USE OF THE BLUETOOTH
1. Press and hold the button for a few seconds(3) button, repeat the process until you select the
BLUETOOTH function (BLUE LED).
2. The LED indicator (6) will start flashing looking for devices to be coupled.
3. Start the Bluetooth feature on the device to be coupled and search the speaker named "AVX 530 BT" or
"Music_BT01" and enter the security code (PIN) 0000 if required.
4. For mating occurred, a tone sound and the LED indicator (6) will remain blue.
5. Use the buttons(3), (4) e (2) how to use the MP3 player to control the playback of songs.
TECHNICAL CHARACTERISTICS
Power Supply: ..............................................240V~50Hz
Max Audio power: ..................................................60W
Bluetooth transmission power:........................2,5mW
Bluetooth transmission: ....................................2,4GHz
S/N Ratio: ........................................................... >=75dB
Separation: ......................................................... >=50dB
Speakers Dimensions: ......................143x250x175mm
AVX 530 bt
SPEAKERS
Frequency Response: ..............................40Hz-20KHz
Woofer: .........................................................................4"
Tweeter: ........................................................................1"
RADIO
Band frequency: ................................. FM 87,5 - 108 MHz
8
ENGLISH
Tabla de contenido
