Wireless Communication - Milwaukee 2660-20 Manual Del Operador

Ocultar thumbs

Contenido

página de 17

/ 17
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

MAINTENANCE

To reduce the risk of injury, always

WARNING

unplug the charger and remove the

battery pack from the charger or tool before

performing any maintenance. Never disassemble

the tool, battery pack or charger. Contact a

MILWAUKEE service facility for ALL repairs.

Maintaining Tool

Keep your tool, battery pack and charger in good

repair by adopting a regular maintenance program.

Inspect your tool for issues such as undue noise,

misalignment or binding of moving parts, breakage of

parts, or any other condition that may affect the tool

operation. Return the tool, battery pack, and charger

to a MILWAUKEE service facility for repair. After six

months to one year, depending on use, return the

tool, battery pack and charger to a MILWAUKEE

service facility for inspection.

If the tool does not start or operate at full power with

a fully charged battery pack, clean the contacts on

the battery pack. If the tool still does not work prop-

erly, return the tool, charger and battery pack, to a

MILWAUKEE service facility for repairs.

Cleaning/Lubricating

Clean and lubricate the nose of the tool after heavy

use (5000 rivets) or if tool becomes contaminated

with dust and debris.

1. Remove the battery pack.

2. Remove the nose housing from

the tool and the nose piece from

the housing.

3. Remove the guide (with jaws),

pusher tube, and spring from

the tool.

4. Clean all pieces with a dry cloth

and inspect for damage. If dam-

aged, return to a MILWAUKEE

service facility for repairs.

5. A p p l y a s m a l l a m o u n t o f

51-08-4290 oil to the pieces and

reassemble, as shown. Ensure

the jaws are properly seated in

the guide.

ONE-KEY™

Chemical Burn Hazard.

WARNING

This device contains a

lithium button/coin cell battery. A new

or used battery can cause severe in-

ternal burns and lead to death in as

little as 2 hours if swallowed or enters the body.

Always secure the battery cover. If it does not

close securely, stop using the device, remove the

batteries, and keep it away from children. If you

think batteries may have been swallowed or en-

tered the body, seek immediate medical attention.

Internal Battery

An internal battery is used to facilitate full ONE-KEY™

functionality.

To replace the battery:

1. Remove the battery pack.

2. Remove the screw(s) and open the battery door.

3. Remove the old battery, keep it away from children,

and dispose of it properly.

4. Insert the new battery (3V CR2032), with the posi-

tive side facing up.

5. Close the battery door and tighten the screw(s)

securely.

WARNING

your tool, battery pack or charger in liquid or

allow a liquid to flow inside them.

Clean dust and debris from any vents. Keep tool

clean, dry and free of oil or grease. Use only mild

soap and a damp cloth to clean, since certain clean-

ing agents and solvents are harmful to plastics and

other insulated parts. Some of these include gasoline,

turpentine, lacquer thinner, paint thinner, chlorinated

cleaning solvents, ammonia and household deter-

gents containing ammonia. Never use flammable or

combustible solvents around tools.

For repairs, return the tool, battery pack and charger

to the nearest authorized service center.

WARNING

For a complete listing of accessories, go online to

www.milwaukeetool.com or contact a distributor.

For products provided with wireless communication

features, including ONE-KEY™:

Pursuant to part 15.21 of the FCC Rules, do not

modify this product. Modification could void your

Nose

authority to operate the product. This device complies

piece

with part 15 of the FCC Rules and ISED-Canada's

license exempt RSS standards. Operation is subject

Nose

to the following two conditions: 1) This device may

housing

not cause harmful interference, and 2) This device

must accept any interference received, including

Jaws

interference that may cause undesired operation.

Guide

1-800-SAWDUST

Pusher

tube

Spring

Contact Corporate After Sales Service Technical

Support with technical, service/repair, or warranty

questions.

Email: [email protected]

B e c o m e a H e a v y D u t y C l u b M e m b e r a t

www.milwaukeetool.com to receive important

notifications regarding your tool purchases.

To reduce the risk of personal in-

jury and damage, never immerse

Cleaning

Repairs

ACCESSORIES

Use only recommended accesso-

ries. Others may be hazardous.