Control Panel - ProBreeze PB-F10 Manual De Instrucciones

CONTROL PANEL

1. Power indicator lights
2. Fan speed knob
CONTROLS
Power Indicator Lights
•
Indicate the remaining battery charge
percentage of the rechargeable battery.
When fully charged all power indicator
lights will illuminate.
• Note, 20% will always show as red but
all other power indicator lights will show
as blue.
•
As the battery charge decreases from
100% to 20% the power indicator
lights will turn off in descending order
from right to left. Prior to descending
through each respective battery charge
percentage the higher battery charge
percentage will blink briefly indicating
that the battery charge percentage is
about to reduce.
•
When at 20% the power indicator light
will not blink prior to reaching 0%. Once
0% is reached the appliance will turn off.
Fan Speed Knob
Turns the appliance on and off and controls
the fan speed.
Note: The fan speed is stepless meaning
that it can be adjusted to multiple fan speed
variables to meet specific requirements.
5 | English
20%
1
OFF
2
SET-UP
Prior to use follow the below steps and
ensure that the appliance is fully charged.
1. Remove the appliance and power
adapter from the box.
2. Place the appliance on a flat and stable
surface.
3. Plug the power adapter into a power
socket and connect to the power
connector to fully charge the appliance
4. Whilst charging, the LED indicator lights
will flash consecutively from left to
right. As the power is restored in 20%
increments the corresponding light will
stop blinking and remain permanently on.
5. Once fully charged all the power
indicator lights will remain on.
6. Unplug the power adapter from the
power socket and the power connector.
The indicator lights will switch off.
7. Turn the appliance on.
Fan Angle Adjustment
Adjust the fan angle through 160° to achieve
optimal air circulation.
To adjust the fan angle:
1. Turn off the appliance.
40% 60% 80% 100%
ON