HQ-Power VDPC146 Manual Del Usuario página 11

5. Transmit and Receive MIDI files
Open-loop mode
TRANSMITTER
MIDI out
Closed-loop mode
TRANSMITTER
MIDI out
6. Low Power
When the power voltage is low, the display will show LOP. Please check your power supply. LOP may appear briefly
just after you have turned the device on. Pay no attention to this, it's normal.
7. MIDI Run
• If no MIDI data are received for ten minutes, the VDPDMXC146 goes to standby mode.
• You need to enter the device ID (= 55H) in order to send or receive a file. You can add scenes to the memory or
call them up and you can exchange information with a device that is connected to your VDPDMXC146.
• This unit sends or receives NOTE information as follows :
NOTE NUMBER
22 – 69
70 – 93
94
95
96
97
98
99
100
101
102
8. Switch the display between 0-100% and 0-255
• Hold the RECORD button
• Press the % OR 0-255 key
• Release the RECORD button
VDPC146
MIDI in
Programme Master
Channel Dimmer
RECEIVER
MIDI in
RECEIVER
MIDI out
VELOCITY
11
MIDI in
FUNCTION
Turn on/off programme 1 - 48
Turn on/off channel 1 – 24
FULL-ON
DARK
HOLD
Turn on/off audio chase
CHASE / SCENES mode
DOUBLE PRESET mode
SINGLE PRESET mode
Step change
BLACK OUT
VELLEMAN