Stihl MSA 120 C Manual De Instrucciones página 56

English
To properly lower the depth gauge:
► Lay the appropriate file gauge for the chain pitch on the
saw chain and press it against the cutter to be checked. If
the depth gauge protrudes past the file gauge, the depth
gauge must be filed down.
► File the depth gauge so that it is flush with the file gauge.
► Afterwards, remove the file gauge and file the leading
edge of the depth gauge parallel to the service mark.
When doing this, be careful not to further lower the highest
point of the depth gauge.
► Lay the file gauge on the saw chain to check the height of
the file gauge. The highest point of the depth gauge must
be flush with the file gauge.
► After sharpening, clean the saw chain thoroughly,
removing any filings or grinding dust.
► Oil the saw chain thoroughly.
54
24 Inspection and Maintenance
0458-716-8621-D