Charging
1
1. Turn ON
2.Plug USB Cable
Abnormal Charging / Charging NOTE
If the indicator show a rapid dim fast-flashing
of red,it means abnormal charging:
1. Tighten the End Cap and the Body properly.
2. Press the tail switch to turn the light on
(the same as you turn on the flashlight).
Section structure diagram
Schematic circuit diagram
2
1
6
1.Brightness automatically decreases with time.
2.High brightness mode has a limit of 1- 3 minutes.
3.Intelligent Thermal Protection System (ITS).
4.The usage time varies depending on the battery
8
10
Charging
2
Only low modes is available while charging.
After being fully charged, the indicator
will be BLUE.
During charging, the red indicator blinks
once every 1.5 seconds.
ITS Smart Temperature Control System
capacity.
4
3
2
5
Regular cleaning the battery contacts
(by using a cotton swab soaked in rubbing
alcohol) can improves the flashlight's
performance as dirty contacts may cause
the flashlight stop working.
7
8
1
6
7
11
9
