Maintenance; Storage; Troubleshooting; Environmental Protection - Worx WX031 Manual Original

6. MAINTENANCE

Remove the battery before carrying out any
servicing or maintenance.
Emptying the collection container (See Fig. J1, J2,
J3)
Dry Waste:
Remove the battery pack. Unhook the two locking latches
and remove the lid. Inspect the filter, lightly shake any
dust or dirt from it, or replace if necessary. Empty the
collection container, or wash out if necessary. Before
replacing the lid, make sure all pieces are completely dry.
Reinstall lid and lock securely.
Liquid Waste:
Remove the battery pack. Unhook the two locking latches
and remove the lid. Empty the collection container, or
wash out if necessary. Before reinstalling the lid, make
sure all pieces are completely dry. Reinstall lid and lock
securely.
WARNING: Do not use the vacuum without
installing the filter. If suction has decreased, empty
the tank of debris or clean the filter.
Filter Cleaning (See Fig. K)
Remove the battery pack. Unlock the two locking latches
and remove the lid.
To Clean/Replace: Remove the filter by loosening the
12
screws on top of the tank lid. Lightly shake any dust or dirt
off the filter or replace it if needed. Reinstall the filter by
aligning it back on the lid and tightening the screws.
NOTE: Make sure the filter is seated properly.
WARNING: Never wash the filter in a washing
machine.
NOTE: Clean the filter regularly to ensure optimal suction
and performance.

7. STORAGE

Store the hose and nozzles as shown in Fig. L1,
L2, L3.
Clean all foreign material from the vacuum cleaner.
Clean the outside of the collection container with
warm water and mild soap. Empty and clean the
collection container, hose, nozzles, and attachments
with warm water and mild soap, and allow to
completely dry before storage. The collection
container should be disinfected if needed before
prolonged storage. Store indoors where is dry and
inaccessible to children. Keep away from corrosive
agents such as garden chemicals and de-icing salts.
20V Cordless Wet/Dry Vacuum
FOR BATTERY TOOLS:
The ambient temperature range for tool and battery
use and storage is 0 C-45
o
The recommended ambient temperature range for the
charging system during charging is 0

8. TROUBLESHOOTING

Issue Causes
No battery
Battery is low
Vacuum
Filter blocked
does not
turn on
Tank lid is not
firmly latched
Hose blocked
9. ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
C.
o
C-40 C.
o o
Solutions
Install battery
Charge the
battery
Clean or replace
the filter
Secure the tank lid
Clean blockage
EN