Operating Limits; Control Devices; Stop - battioni Pagani BLM Serie Manual De Instrucciones De Uso Y Mantenimimento

instruction manual
for use and maintenance of BLM series

5.3 - OPERATING LIMITS

During use, do not exceed the conditions of speed and power established by the manual.
ATTENTION: the BLM is not suitable for conveying toxic, flammable or dangerous gases.
ATTENTION: the BLM is not suitable for working in potentially explosive environments.
ATTENTION: the introduction of solids or liquids will seriously damage the BLM.

5.4 - CONTROL DEVICES

A handle (1), located at the top of the manifold, is provided for the control of intake and compression phases. This can be operated
manually. To establish in which direction the handle must be turned to select the intake or compression phase, follow the instructions
provided by the manufacturer of the system. If the reversing gear locks up, use a lever to lift the handle.
Selection of the suction or compression phase using the handle must be performed with
the blowers pump stopped.

5.5 - STOP

To stop the vacuum/pressure blowers pump, it is necessary to suspend the PTO motion transmission in order to avoid unintentional
activation. Eliminate the differential pressure from the system and bring it back to atmospheric pressure.
page 30
1