jbc HDE-UB Serie Manual Del Usuario página 9

Maintenance
Before carrying out maintenance or storage, always allow the equipment to cool.
- Clean the station screen with a glass cleaner
or a damp cloth.
- Maintain tip surface clean and tinned prior to
storage in order to avoid tip oxidation. Rusty
and dirty surfaces reduce heat transfer to the
solder joint.
- Periodically check all cables and tubes.
- Replace a blown fuse as follows:
1. Pull off the fuse holder and remove the fuse.
If necessary use a tool to lever it off.
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
All manuals and user guides at all-guides.com
Fuse holder
w w w.jbctools.com
Clean
periodically
2. Press the new fuse into the fuse holder and
return to the station.
Fuse
Fuse holder
9