Operations Cautions - EGAmaster 66556 Manual De Instrucciones

1) Do not allow chemicals such as acetone, benzene, thinner, trichloroethylene ketone, or
other similar chemicals to come in contact with the sensor screwdriver housing as damage
will result.
2) Use the sensor screwdriver carefully, do not drop or be impacted, it is best to use a
balancer to lift it, and set it on the auxiliary arm for operation.
3) Loading and unloading the sensor driver head: Simply pull down the screwdriver head
cap with your fingertips to freely attach or detach the sensor screwdriver head, release the
finger to return the screwdriver head cap to fix the sensor screwdriver head.
Note
Make sure to turn off the power switch and remove the power plug from the socket when
installing and removing the sensor driver.
4) Do not drop or abuse the sensor screwdriver.
5) Connect the power cord to a power outlet.
CAUTION
Danger of electric shock due to wet power cord plug or hands.
6) Do not use this screwdriver for tightening wood screws. This is "Metal Assembly sensor
screwdriver"
7) The control settings of the sensor screwdriver can be set by the 66549 controller. Please
refer to the 66549 operation manual for setting adjustment.
8) The sensor screwdriver operation can be set to the press-plate start/down-press start/pull-
screw start...etc. by 66549 controller. Please refer to 66549 operation manual.
9) Operation frequency: The original setting of the frequency is 2 sec on / 5 sec off. The
number of screws fastened is about 9 pcs. Over frequently using makes the motor
overheated and damage to screwdriver.
Enough heat-dissipation is good for screwdriver.
10) Whenever the sensor screwdriver is not used, turn off the power for the controller or unplug
the power cord.
11) Don't touch switch during operating for keeping system from wrong judgement.
12) Please use the designated connection cable for 66549.

OPERATIONS CAUTIONS

15