Never immerse any part of the air fryer body, power cord or plug in water or any other liquid.
Before assembling or disassembling your air fryer, ensure it is unplugged and all parts are cool.
Unpack the appliance and remove all packaging, promotional materials and stickers. Remove all
printed documents. Wash the inner cooking basket and removable cooking tray with hot, soapy
water. Rinse then dry all of the parts. Lightly cover the entire cooking surface, including the cooking
grate, with cooking oil. Turn on the appliance and warm to maximum heat. Then turn off and cool
completely. Clean excess oil off with hot water without rubbing. Finally, dry the surface with a dry
cloth. Now the air fryer is ready to be used.
Preparing Your Air Fryer
1. Remove all packaging materials, stickers and labels in and on the unit.
2. Wash all accessories and wipe the inside of the unit with a damp cloth.
3. Place unit on a flat surface.
4. Plug the air fryer into an electrical outlet. Unit will enter stand by mode
5. Press the Power button to turn the unit on, unit will enter function selection mode. The default
setting is Fries (200C and 18mins), you may start cooking using this default setting by pressing the
Start/Cancel button
Mode), OR you may switch the setting using the Menu button
Your air fryer allows you to adjust the temperature and time in any setting using the temp up/down
and time up/down
time or to adjust based on food quantities.
1. In any setting, press the Plus or Minus signs next to the temperature
to desired temperature and time.
2. Use the handle to gently pull the cooking basket, ensure the cooking tray is properly in place and
place the food in the basket. Replace the cooking basket back into the air fryer properly.
3. Then press the
Note: The air fryer will not start heating up unless the cooking basket is fully closed. To pause the
cooking cycle slightly open the cooking basket, to cancel the cooking cycle and/or select a different
setting, press the
any time, even while the unit is running.
4. Once timer is up, the unit will beep to inform cooking cycle is complete. Pull the basket out of the
appliance and place it on a heat resistant surface. Check if the foods are ready. If not, simply put
back into the Air Fryer and set the time for a few extra minutes.
CKSTAF90D_22SEM3.indd 4
CKSTAF90D_22SEM3.indd 4
Before First Use
Usage Instructions
, OR you may manually adjust the Time and temperature (See Manual
Manual Mode
buttons. Use these buttons when a recipe calls out for a specific cooking
for the air fryer to begin working
button and select the new setting, the time and temperature can be adjusted at
(See Preset Mode).
English - 4
and time
icons to adjust
2022/1/20 9:26 AM
2022/1/20 9:26 AM