Connecting To The Tv; Technical Data - Loewe klang sub1 Manual Del Usuario

Loewe klang sub1

Connecting to the TV | Technical data
5

Connecting to the TV

5.1 TV compatibility
Loewe klang sub1 is compatible with all Loewe
TV sets with SL3, SL4, SL5, SL7 chassis and all
other TV sets with variable audio line-out. This
means that the TV must support changing the
line-out volume synchronously with the volume
of the TV speakers.
5.2 Pairing subwoofer with a TV
via Bluetooth transmitter
1. Connect the supplied USB extension cable
to the TV.
2. Connect the Bluetooth transmitter to the
other end of the USB extension cable.
3. Use 3,5mm audio cable to connect trans-
mitter to the "AUDIO OUT" connector on
the TV.
Note: If you want to use a different audio cable
than the one included in the package, use only
an audio cable with ground loop isolator.
4. Press and hold the pairing button on the
transmitter until LED indicator on it will
start flashing quickly.
5. Press and hold volume knob of the
subwoofer for at least 3 seconds to enter
pairing mode.
6. Your TV and the subwoofer will now be
connected by the transmitter; the LED
indicator on the transmitter will stop
flashing.

Technical data

Loewe device type:
Part number:
Power supply:
Power consumption in standby mode:
Audio output power:
Speaker equipment:
Frequency response (electrical):
Frequency response (acoustical):
Bluetooth version
Bluetooth power/frequency range:
Bluetooth protocols:
Device dimensions (W x H x D):
Device weight:
Ambient temperature:
Relative humidity (non-condensing):
Connections
9
5.3 Connection via audio cable
It is possible to connect a TV with the subwoofer
directly with 3,5 mm audio cable.
1. Connect 3,5 mm audio cable to "LINE IN"
jack on the bottom of the subwoofer. Use
only a cable with a right-angle 3,5 mm
stereo plug for this connection.
2. Secure the cable to the cable management
compartment.
3. Connect the other end of the cable to the
"AUDIO OUT" jack on the TV.
4. Rotate the volume knob on the subwoofer
to adjust the sound level.
Note: In case when both Bluetooth and wired
connections are established, sound will be
reproduced via Bluetooth.
5.4 Additional settings
for Loewe TV
If you are connecting subwoofer with Loewe
TV, you will need to set it up in the TV menu.
1. Press the HOME button to open the
Home screen and then select [System
settings] – [Connections] – [Sound
Components].
2. Select [Speaker System (AUDIO OUT)].
3. Select the correct speaker setting option
and adjust the subwoofer volume using
the TV menu.
klang sub1
60610D10
AC 100 V – 240 V / 50 – 60 Hz
<0,5W
160 W
2 x 4 inch woofer + 4 x 4 inch passive speaker
20 – 300 Hz
40 – 100 Hz
V5.0
<10 mW at 2402 - 2480 MHz
A2DP, AVRCP, aptX Low Latency
287 x 287 x 158 mm
4,7 kg
5° C – 35° C
20 – 80%
Bluetooth, Line in (3,5mm)
5.5 Auto Standby
The subwoofer automatically switches to stand-
by mode to save power in the following cases:
1. When Bluetooth is disconnected for 9
minutes.
The subwoofer automatically wakes up
when it detects an incoming Bluetooth
signal.
If the subwoofer does not wake up
automatically, briefly press the pai-
ring button of the transmitter to re-
connect to the last paired device.
2. If no line-in input signal is present for 10
minutes.
The subwoofer automatically wakes up again
when it detects an incoming signal.
Apps
Scan the QR code below with your phone and
download the recommended app.
"my Loewe" is an entry point to
the Loewe world and gives you
access to all user manuals for
your Loewe products.