Technical Specifications - Parweld XR935H Guía De Instrucciones

XR935H -

TECHNICAL SPECIFICATIONS

Viewing Area
Cartridge Size
UV/IR Protection
Light State
Dark State
Power Supply
Power On/Off
Switching Time
Dark to Light
Operating Temperature
Storage Temperature
Helmet Material
Total Weight
Minimum Operating Amperage
DO
Ensure the front cover lens is fi tted before use and remove protective fi lm.
Ensure that the lens is clean and there is no dirt or spatter covering the 2 sensors at the front of the fi lter.
Inspect all parts for signs of wear or damage. Any scratched or cracked parts should be replaced prior to
use.
DON'T
Never place the helmet on a hot surface.
Never open or tamper with the fi lter cartridge.
OPERATION
1. ADJUST THE WELDING HELMET ACCORDING
TO INDIVIDUAL REQUIREMENTS
The headband should be adjusted both in diameter and height.
The angle between face and helmet should be
adjusted and is recommended to be
10° - 12°.
2. ON/OFF
The solar unit automatically switches on when
exposed to light.
Everyday Light Reactive Welding and Grinding Helmet
100 x 41mm (3.93" x 1.62")
110 x 90 x 8mm (4.33" x 3.54" x 0.31")
Permanent DIN Shade 16
DIN Shade 4
DIN Shade 9 to 13 Variable
Solar Cell with Built-in Battery
Fully Automatic
Light to Dark <1/30,000s
0.1 - 1.0s (Internal Variable)
-10ºC to +60ºC
-20ºC to +70ºC
High Impact Polyamide Nylon
460g
10 Amps
- ENGLISH
3