Phottix Atlas II Manual De Instrucciones página 8

6. Turn on the camera, Phottix Atlas II and
ash.
7. Set the camera and ash to Manual mode.
* It is not unusual for the ash to discharge
once after turning on the Phottix Atlas II.
Connecting two ashes /
studio lights
One Phottix Atlas II can be used to trigger two
studio strobes or two ashes. Both ashes or
studio strobes must be of the same brand,
model, and voltage. DO NOT USE DIFFERENT
FLASHES! Flashes have di erent trigger volt-
ages – use the same make and model. Phottix
is not responsible for damage resulting from
improper use.
1. Turn o the camera, ash/strobe, and the
8
Phottix Atlas II transceiver.
2. Connect compatible cables to the Atlas II
Flash in/out port and Flash out port.
3. Connect the cables to two ashes or strobes.
4. Set the Transmit / Receive Mode Switch on
the Atlas II to Rx (receive mode).
5. Turn on the ash/strobe, Phottix Atlas II and
camera.
6. Set the ash to Manual mode.
* It is not unusual for the ash to discharge
once after turning on the Phottix Atlas II.