Instruction Manual - Phottix Atlas II Manual De Instrucciones

Please Note
1. The Phottix Atlas II hot shoe connection is
designed to re speedlight-type ashes that
are triggered by the center contact. Some
ashes (by Nissin, Sigma, and other manufac-
turers) may not be triggered by the center hot
shoe contact but by speci c secondary
contacts. Please check your ash manual for
speci cs. These ashes can be red by PC Sync
cable if available.
2. The Atlas II is designed to work in Manual
Exposure mode and has no TTL functions.
3. Transmit or receive mode must be set on the
transceivers, the Atlas II will not do both at the
same time.
4. The Phottix Atlas II is not compatible with
previous Phottix Atlas series ash triggers.
En
Tip:
Turn o all devices – ashes/strobes,
cameras, and Phottix Atlas II transceivers -
when connecting and disconnecting devices.
Compatibility
The Phottix Atlas II has limited compatibility
with Phottix Odin, Strato II Multi 5-in-1 and
Phottix Strato 4-in-1 Wireless Trigger Systems.
1. Phottix Odin TCUs set on Channel 1, 2, 3 or 4
and in any group will trigger the Phottix Atlas II
set on Channel 1, 2, 3 or 4. Other Odin TCU
functions will not work with the Atlas II. Using
Odin TCUs in HSS mode may cause issues with
ash sync when using the Atlas II.
2. Phottix Strato II Transmitter set on Channel
1, 2, 3 or 4 and in any group will trigger the
Phottix Atlas II set on Channel 1, 2, 3 or 4.

INSTRUCTION MANUAL

3