FONESTAR MZ-648 Serie Manual De Usuario página 4

EN
Similarly, the MASTER or SLAVE function of each of the microphones can be chosen. In MASTER mode, the
MZ-648 microphone has priority over other MZ-648 microphones that are configured as SLAVE.
PAGING WITH THE MZ-648 MICROPHONE
To speak, select the zones required using the ZONE buttons 1 to 6 on the MZ-648 microphone and then
press the TALK button. When you have finished paging, press the TALK button again.
If the BUSY indicator is lit, you must wait for it to switch off in order to speak, as another MZ-648 microphone
with the same configuration (SLAVE or MASTER) or greater (MASTER) is operating at that moment.
By pressing the ALL CALL button, all the zones are selected simultaneously to make general announcements.
MESSAGE PLAYBACK WITH THE MZ-648 MICROPHONE
In order to activate message playback, the MSG microswitch on the MZ-648 microphone must be placed
in the ON position.
This microphone allows playback of 6 stored messages using the MESSAGE buttons 1 to 6, in simple or
loop playback mode in the zones you select.
In simple playback mode, the message will be played completely once. To do so, select the message you
wish to play using the MESSAGE buttons 1 to 6 on the MZ-648 microphone and the zone or zones in which
you want it to be played. Then, press the START/STOP button to start playback of the message. If you wish
to stop playback before the message finishes, press the START/STOP button again.
To play the message in a loop, select it with the MESSAGE buttons 1 to 6 on the MZ-648 microphone and
the zone or zones in which you want it to be played. Then, press the REPEAT/STOP button to start playback
of the message in a loop. The message will be played indefinitely until the REPEAT/STOP button is pressed
again or an input with greater priority is activated.
By pressing the ALL CALL button, all the zones will be selected simultaneously for message playback.
RECORDING AND MODIFICATION OF THE MZ-648 MICROPHONE MESSAGES
It is possible to record 6 messages in the internal memeory of the MPZ-6480RGU which will be played via
the MZ-648 microphone.
To do so, place the MSG/CHI/PROG selector on the rear panel of the MPZ-6480RGU amplifier in the MSG
position and connect the amplifier to your computer using a USB cable.
- 4 -