BOMANN TSG 7402 Instrucciones De Servicio página 75

1 1 1 1 Power: Press the button for about 3 sec. to
turn on/off the power supply.
2 2 2 2 Program: Button to select the rinse pro-
grams [ ECO – 1H – Rapid].
3 3 3 3 Extra Dry: Button to activate / deactivate the
[Extra Dry] function. Note that the function is
program dependent!
4 4 4 4 Delay: button to select the start delay by
1-24 hours. Press the Start/Pause button and
the appliance start automatically after the se-
lected time delay has expired.
5 5 5 5 Self-Cleaning: Button to select the program
[Self-Cleaning].
6 6 6 6 Anti-Bac.: Press the button for about 3 sec.
to activate / deactivate the [Anit-Bac.] function.
7 7 7 7 Glass: Button to select the program [Glass].
8 8 8 8 Start/Pause: button to start/pause the se-
lected or running program.
9 9 9 9 Display: the salt consumption (water hardness)
and the start delay are selected via the display.
The start delay (when activated), the program
remaining time and any error codes are dis-
played.
Control lamp: lights up, when dishwasher
salt needs refilling.
Control lamp: lights up, when the water
supply is closed or the water tank is not filled.
Starting a program Starting a program Starting a program Starting a program
• The water supply must be opened to maximum
pressure OR the water tank must be filled.
• Load the dishwasher baskets.
• Fill in the detergent.
• Turn on the appliance.
• Set the required program options.
• Start the operation.
Interior light Interior light Interior light Interior light
The interior light switches on automatically:
by opening the unit door in power-on or
-
standby mode,
by pressing a button during the rinse cycle
-
After about 5 minutes with the door open or after
the last button press, the interior light switches off.
Changing the program Changing the program Changing the program Changing the program
CAUTION: CAUTION:
CAUTION: CAUTION:
A program change should be done only a short
time after starting the program. Otherwise, maybe
detergent has been dissolved and rinse water
drained off.
First press the Start/Pause button to stop the
•
current rinse program.
• Press the Program selection button for about
3 seconds.
• Select a new program and start the new opera-
tion.
Forgot to add a dish? Forgot to add a dish?
Forgot to add a dish? Forgot to add a dish?
WARNING: WARNING: WARNING: WARNING:
Open the door very carefully during operation,
there is a risk of water squirting out.
Dishware can be added any time before detergent
has been dissolved or rinse water drained off.
• Press the Start/Pause button to stop the opera-
tion. Once the spray arms have stopped, you
can fully open the appliance door.
• Add forgotten dishware.
• Press the Start/Pause button, the operation will
continue after approx. 10 seconds.
75