Assembly; Parts You Will Receive; How To Assemble Your Sprayer - Swissmex SP07 Manual De Operador

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

3.3 ASSEMBLY

3.2.1 Parts you will receive

- 1 Pump handle
- 1 Pump lever
- 1 Spray wand
- 1 Tank lid
- 1 Owner's manual
Inside the tank you will find:
- 1 Strainer
- 1 Bushing guide
- 1 Felt ring
- 1 Pump tube with hose and shut-off valve
- 1 Agitator
And a plastic bag with:
- 1 washer and "R lock pin
- 3 washers and 3 "c" lock pin
- 1 Adjustable nozzle
- 1 Hole cone nozzle
- 1 Polimer Flat Fan
- 1 Full cone

3.3.2 How to assemble your sprayer:

Following is explained how to assemble your sprayer, read carefully the text. The number at the beginning of the line corresponds to the graphic.
1. Take out all the parts from the box and from the tank.
2. Place the sprayer vertically on a table, place the pump holder nut, gasket and felt ring on the side mouth. Oil the piston sleeve and the pump tube, insert
it in the pump tube guide; carefully directing the piston sleeve to avoid any damage.
3. Tighten the pump holder nut. Place the agitator.
4. Place the strainer and the tank lid on the tank opening.
5. Insert the connecting rod in the pump tube placing one flat washer on each side, fix them with the lock pins "C".
6. Pass the pump handle through the base of the tank fixing it to the connecting rod with a flat washer and a lock pin "C" and on the other end with a lock
washer and a cotter pin.
7. Finally tighten the spray gun and tube.
1
4
6
MODEL: 189195 SP09
289195 SP10
6
MODEL:
081195 SP07
101195 SP08
2
5
081195
189195
SP07
SP09
101195
289195
SP08
SP10
model
model
SP08
SP07
3
models
SP09
SP10
SP07
SP08
SP09
SP10
3

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Sp08Sp09Sp10081195101195189195 ... Mostrar todo

Tabla de contenido