Radio Mode - Technaxx TX-103 Manual De Usuario

Nostálgico bluetooth digitalizador para disco de vinilo all-in-one
Ocultar thumbs Ver también para TX-103:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 70
Connecting to headphones
 Adjust the volume to an appropriate level before you put on your
headphones.
 Plug in your 3.5mm headphone jack to the headphone socket.
Connecting to an external amplifier
 This feature enables you to play turntable music through amplifier
or external speakers. You will need an RCA cable to make this
connection (not included).
 Plug one end of the Red and White RCA jacks into the LINE OUT
ports at the back of the TX-103 and the other end into R (red) and L
(white) sockets at the back of the amplifier or external speakers.

Radio Mode

FM Antenna
While in FM mode, tune in to an FM station and extend the antenna
to find a position that provides the best reception. The antenna may
need to be repositioned if you move the unit to a new location.
Playing the Radio
 Turn ON the unit and adjust the volume to an appropriate level.
 Turn the Function knob to the RADIO position.
 Set the slide switch (9) to FM
 Extend the antenna to obtain the best reception.
 Turn the Tuning knob to your desired radio station.
If reception is poor: FM Broadcast: Extend and move the FM
antenna until you receive the station clearly.
21
Tabla de contenido
loading

Tabla de contenido