Technaxx TX-103 Manual De Usuario página 12

1 Tone Arm / 2 Cue Lever
Replacing the Stylus
It is recommended that the stylus is replaced as soon as you notice
a change in the sound quality. Prolonged use of a worn-out stylus
may damage the record. Wear and tear on the stylus will be
accelerated when playing 78 RPM records.
A: Removing the stylus from the cartridge
Place a screwdriver at the tip of the stylus heads hell and push
downwards in the direction shown in sketch "A". Remove the stylus
head shell by pulling it forwards and pushing downwards.
B: Installing the new stylus
Hold the tip of the stylus head shell and insert it by pressing in the
direction illustrated by "B". Push the stylus head shell upwards in the
direction illustrated by "C" until the stylus locks into the tip position.
(1) Guide pins inside
12