Dry vacuuming function with dust bag
Insert the hose by pushing it into the suction mouth.
Attach the proper accessory and operate your device.
NOTE: Do not operate your appliance without water when
using water filtration function.
WARNING: Detergent residual, from handy cleaning of
the carpets and parquetries causes foaming in the tank. In
that case immediately switch off the appliance and change
the water in the tank, otherwise your motor will be
damaged by foams.
Unlock the locking latches pulling outwards as shown in the
picture.
Put the top cover away through holding it from carrying
handle.
Lock the dust bag to the clips which are on the back side of
the suction mouth.
The dust bag should be fixed into the tank as shown in the
figure.
NOTE: Only the dust bag should be fixed into the tank while
using dry vacuuming function.
- 6 -