HAEGER Aquaclean 1200 Instrucciones De Uso página 10

How to use air cleaner function
Put the hose into the suction mouth and choose the right
accessory for wet vacuuming function.
When the vacuumed water has reached to maximum level,
the buoy will automatically stop vacuuming. In that case,
empty the tank then you may go on vacuuming again.
NOTE: Do not put water into your tank during wet
vacuuming function.
Install the water filter exhaust inside the tank.
Fill the tank with water to the mark "MAX. WATER LEVEL"
(2 litres).
Insert the inner cover and add 3-4 drops perfume into the
sponge filter. Put the top cover back on the tank and lock
the latches. Switch on the device by pushing ON/OFF
button.
NOTE: Do not attach hose or any accessories to the suction
mouth while the unit is in operation.
When you run the appliance for about 25-30 minutes, air
cleaner captures the particulars flying around, suck them
into the water and keeps them there. Air cleaner also
removes bad odours and freshens the air you breathe.
NOTE: Tank and inner cover filters must be clean while
using air cleaner function.
- 8 -