Idiomas disponibles
Idiomas disponibles
3/16"
Finish Jamb
Finish Flat Jamb
Shim to Level
with Door
Door Guide
Split
Jamb
Door Guides
12. Installing Finish and Flat Jambs (Not Included in Set)
a) On pocket end of opening, position both Finish Jambs so
that they lie between the Nailing Strip and the rough floor.
b) Butt the Finish Jambs beneath the Nailing Strip and if
necessary, shim so Finish Jambs are plumb, leaving 3/16"
clearing between the door and Finish Jambs.
c) Nail into position with 2" nails.
d) Install Finish Flat Jamb on opposite side of door opening.
e) Nail into position with 2" nails. Slide door over and if
necessary shim Finish Flat Jamb so it is plumb with door.
13. Installing Door Guide
With nylon guides facing toward the door opening, fasten Door
Guide to Split Jamb using #8 x 1" screws as shown.
Option
•
Floor Guide requires a 3/8" x 7/8" mortise.
14. Installing Door Trim
a) Adjust Door Guides before installing trim. Install door
trim over Door Guides allowing 3/16" clearance between
door and guide.
b) Install In-Track Stop at desired location.
