LiftMaster 8160W Manual Del Usuario página 36

Operation
Connect With Your Smartphone
The Wi-Fi Garage Door Opener is compatible with up to 16 myQ
devices can be paired to the Wi-Fi garage door opener's internal gateway. These devices can be
®
controlled with the myQ App. These devices include any combination of myQ
openers, Wi-Fi garage door openers, myQ
commercial door operators. A LiftMaster Internet Gateway (828LM) can be added if you need to
control more than 10 devices using the myQ
opener itself (controlled by garage door opener through 900MHz). These devices include any
®
combination of myQ light controls or a garage door and gate monitor.
YOU WILL NEED:
• Wi-Fi enabled smartphone, tablet or laptop
• Broadband Internet Connection
• Wi-Fi signal in the garage (2.4 GHz, 802.11b/g/n required), see page 4
• Password for your home network (router's main account, not guest network)
• myQ ®
serial number located on the garage door opener
DOWNLOAD THE myQ® APP TO SET UP AN ACCOUNT AND CONNECT
Open and close your door, get alerts and set schedules from anywhere. Connected smart garage
door openers also receive software updates to ensure the opener has the latest operational features.
The garage door opener must run through a complete cycle before it will activate Wi-Fi®
programming.
1. Download the myQ® App.
2. Set up an account and connect.
For more information on connecting your garage door opener, visit support.chamberlaingroup.com.
®
enabled accessories. Up to 10
®
garage door
® ®
light controls, myQ gate operators or myQ
®
App. Up to 6 devices can be paired to garage door
®
WI-FI STATUS
LED
Blue
Blue and Green
Green
NOTES:
®
myQ App control WILL NOT work if the garage door opener is operating on battery power.
To erase the Wi-Fi settings, see page 41.
36
An LED on the garage door
opener will indicate Wi-Fi
status. See table below.
Learn
Button
Command
LED
Definition
Off - Wi-Fi is not turned on.
Blinking - Garage door opener is in Wi-Fi learn mode.
Solid - Mobile device connected to the garage door opener.
Blinking - Attempting to connect to router.
Blinking - Attempting to connect to the Internet server.
Solid - Wi-Fi has been set up and garage door opener is connected to the
internet.
Learn
Button
LED