Philips Power Flosser 3000 Serie Manual página 20

20
English
Every few months, or if your nozzle becomes clogged:
Soak the nozzle in a container of 2 parts water and 1 part white
vinegar for 5 minutes. Rinse the nozzle with warm water.
Internal components, hose and handle
Fill the reservoir with warm water and add 1-2 tablespoons
of white vinegar. Remove the handle, point the nozzle at the
sink and turn on the product to run the solution through the
unit until the reservoir is empty. Rinse by repeating with a full
reservoir of clean warm water.
Storage
If you are not going to use the product for an extended period
of time, unplug it from the electrical outlet, clean it and store it
in a cool and dry place away from direct sunlight.
Replacement
Replace nozzles every 6 months or immediately when
damaged. To buy accessories or spare parts, visit philips.com
or go to your local Philips Sonicare dealer. You can also contact
the Philips Consumer Care Center in your country (see the
international warranty leaflet for contact details).
The following spare parts are available:
- Standard nozzle
- Comfort nozzle
- Quad Stream nozzle
Note: The availability of spare parts may differ by country.
ANGZE_Powerflosser_3000.043.4472_BOOKLET-Opmaak_A6_bl.indd 20 10-02-20 10:53