Disinfection And Cleaning; Transportation And Storage; Warranty Statements - Elmi CM-8S Manual De Usuario

Centrifugadora de mesa
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

10
Centrifuge CM-8S
USER MANUAL

Disinfection and cleaning

ENG
Rotor and accessories must be cleaned once a week
to avoid corrosion and changes to material .
Disconnect the centrifuge from mains power sup-
ply, remove rotor, and clean it separately . The rotor,
rotor chamber, and the outside of the centrifuge
should be cleaned with a moist cloth . Only use neu-

Transportation and storage

To ensure safety during transportation, the equip-
ment should be packed in the original manufactur-
er's packaging or similar packaging substitute .
Equipment can be transported in any kind of closed
transport; make sure that equipment is tightly fixed

Warranty statements

Warranty applies for 24 months from the date
of purchase .
Malfunctions that occur due to a fault of the
manufacturer, during warranty period, are re-
paired free of charge .
Warranty is is not valid in the following cases:
If the serial number label of the manufac-
turer is damaged .
If damage occurs as a result of incorrect op-
eration, transportation or storage .
These documents are necessary if applying for
warranty repair:
User manual with serial number of the ma-
chine .
Officially signed report, describing the rea-
sons and circumstances of the equipment
malfunctions .
tral agents to clean these parts . To disinfect, use an
alcohol-based disinfectant (70% isopropanol/water
mixture) . If corrosive, toxic or radioactive liquids or
pathogenic bacteria are spilled in the rotor or its
chamber, the centrifuge must be decontaminated
thoroughly .
and transported accordingly to transportation reg-
ulations . Equipment should be stored in original
manufacturer's packaging in dry room with humid-
ity not more than 80% and temperature range of
+10 C up to +40 C . It is not recommended to store
the equipment more than 36 months .
Warranty repair can be performed only if the
equipment is delivered in the original manufac-
turer's packaging or equivalent safe packaging .
Before returning for warranty repair, ensure
that the device is fully cleaned, decontaminated
and does not present any kind of health risk to
our staff.
If the above warranty requirements are not met,
repair charges are applied to the customer .
For all further questions concerning usage and
maintenance, please contact manufacturer or
product vendor .
Tabla de contenido
loading

Tabla de contenido