Power On And Off; Power On; Power Off; Functions Descriptions - Thinkcar THINKTOOL Manual Del Usuario

www.mythinkcar.com

4.3 Power on and off

4.3.1 Power on

Long press the power button and then the start interface will appear.
This may be caused by too low battery power. Please try to turn it on again after charging the device
for a while.

4.3.2 Power off

Long press the power button until the dialog box pops up, and then turn off the device
according to the prompts. If you need to force shutdown, long press the power button for
more than 8 seconds until the screen goes dark.

5 Functions Descriptions

The ThinkTool host computer have 10 functions, namely, full system diagnosis,
maintenance, tire pressure monitoring, quick test and printing, ThinkStore, ThinkFile, repair
information, remote diagnosis, ThinkMoments, and ThinkModule.

5.1 Diagnosis

Full system diagnosis: it supports more than 160 automobile brands, smart diagnosis
and traditional diagnosis covering OBD II full-function diagnosis, full-system and full-
function diagnosis: read fault codes, clear fault codes, read real-time data streams, special
functions, motion tests, etc.. A diagnostic report will be automatically generated after the
diagnosis.
Smart diagnosis
Connect the vehicle and click "Diagnose" on the main interface. Then, click AUTOSEARCH
to start smart diagnosis. Read the VIN as shown below.
16