Thinkcar THINKTOOL Manual Del Usuario página 16

www.mythinkcar.com
When the host is off, turn on it by pressing the button for 3 seconds.
When the host is on, press the button to wake up the screen or turn off the screen;
Turn off the host by pressing the button for over 3 seconds; force a shut down by
pressing the button for over 8 seconds.
3. Aviation socket: Connect the diagnostic cable or endoscope function extension mod-
ule.
4. Camera button
5. Power inlet: Connect a charger for charging or data transmission.
6. USB expansion port
7. TPMS antenna: It's used for TPMS sensor communication.
8. Rear camera
9. Backplane: Remove the backplane of the host, and install function extension modules
on the back of the host.
10. Loudspeaker
11. Buckle: Fasten function extension modules.
12. Pin: It's used for communication between the function extension module and the host.
13. Magnet: Fasten function extension modules.
Function Modules Diagram:
No. Name
THINKTOOL
1
Host Computer
2 Charging Cable
3 Power Adapter
THINKTOOL
4
Diagnostic Cable
5 THINKPRINTER
THINKPRINTER Thermal
6
Paper
7 THINKWORKLIGHT
THINKTOOL
8
Video Scope
Description
Modular Comprehensive Automotive
Diagnostic Tool
For the host computer
For the host computer
ThinkTool Special Diagnostic Cable
ThinkTool Diagnostic Report Thermal
Printer
Specially for ThinkPrinter
ThinkTool High-Brightness LED Light
ThinkTool HD Video Scope Module
Note
Optional
Optional
13