Tabla de contenido
Idiomas disponibles
Idiomas disponibles
into the mixing chamber, the silicone valve through
which the water flows into the mixing chamber, as
well as the silicone spout with a damp cloth.
5. Regularly clean the water container to make
sure it always stays hygienically clean.
6. Clean the housing with a damp and soft cloth
and thoroughly dry afterwards.
Tips: should the blades be stained by ingredient,
pour some water into the mixing chamber and add
a denture cleaning tablet. Leave it to stand for 1-
24 hours before running a short manual cleaning
program.
Warning: If you wish to clean the blades by hand,
switch off the device and remove the mains plug.
Please pay attention and be careful, the blades
are sharp.
Do not disconnect the power supply of the
appliance during the cleaning program and do not
interrupt the program.
Remove residues from the mixing chamber
Please follow these steps if you wish to remove
any residues or unfinished milk left in the mixing
chamber due to a power outage or for a different
reason:
1. Connect the device to the power supply.
Tabla de contenido
