Automatic Time Synchronisation; Functions; Time Display Modes - Junghans Mega 1000 Instrucciones De Uso

3. Automatic time synchronisation

The fully automatic time synchronisation takes place daily using the DCF77
(Europe) transmitter with CET (Central European Time) at both 2:00 und 3:00
hours, as well as CEST (Central European Summer Time) at 3:00 und 4:00
hours depending on the current local time. With the transmitter WWVB
(North America) and JJY40 respectively JJY60 (Japan) at 2:00 and at 3:00 hours
depending on the current local time.
The display switches itself off automatically when the automatic synchronisa-
tion commences. The display will remain switched off for the whole of the syn-
chronisation period (maximum 9 minutes) or until the procedure is manually
discontinued. The automatic time synchronisation procedure can be disconti-
nued with the use of the T1 button. With the use of one of the buttons ranging
from T2 to T5, it is possible to display the current time during the synchroni-
sing procedure by keeping the button depressed or, by pressing the T5 lighting
button which will display the time for the duration of the illumination. Hereby,
the current hour, minutes and seconds as well as weekday, day, month and
year will be displayed.
For the USA's WWVB time signal transmitter the following specific feature
applies:
After a successful transmitter call or restart, your Junghans Mega 1000
always reads in Pacific Standard Time. Due to the non-uniform changeover
from summer to winter time and the differing time zones in the individual
US states, you are given the opportunity to adjust winter time, summer time
and time zone settings (see 8.1) manually. If, due to where you are, the time
zone or summer / winter time that you have set differs from PST, it is never-
theless retained during any subsequent transmitter call or automatic syn-
chronisation.
46
All manuals and user guides at all-guides.com
The date is also automatically adjusted by the time signal, and this function
also takes 29 February into consideration during leap years.
If, within a 24-hour period, all attempts to receive a signal fail to correctly syn-
chronise the watch, the reception indicator increases by 1 point (see chapter 6,
"Description of the reception indicator mode"). The indicator increases by 1
point for every further day that a signal is not successfully received. On days
when the watch has not been synchronised time is kept with the accuracy of
a quartz watch using the internal time memory. The watch will be synchroni-
sed as soon as a signal is successfully received.
Recommendation: The best conditions for reception of the time signal at night
exist when the watch is not being worn and is not placed near to electronic
devices, mobile telephones or cordless telephones.

4. Functions

The Junghans Mega 1000 has a variety of functions that are shown in the
display. The watch is operated using the five buttons above and below the
display as well as on the side of the watch (the button designations are shown
in the overview located in the foldout front cover).

4.1 Time display modes

The following five time display modes are available.
In these modes the watch cannot be adjusted using the T1 or T2 buttons. Only
T3 (to switch between Time, Stopwatch, Countdown Timer and Alarm modes)
and T4 (to select time display mode) are active so that the watch settings can-
not be accidentally changed.
Stop- Countdown
Time
watch timer
Alarm
47