Specifications - Honda GC160 Manual Del Propietário

Air Index
An Air Index Information hang tag/label is applied to engines certified
to an emission durability time period in accordance with the
requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower
the Air Index, the less pollution.
The durability description is intended to provide you with information
relating the engine's emission durability period. The descriptive term
indicates the useful life period for the engine's emission control
system. See your EMISSION CONTROL SYSTEM WARRANTY
(page 13) for additional information
Descriptive Term
Moderate
Intermediate
Extended

SPECIFICATIONS

GC160
Length x Width x Height
Dry weight
Engine type
Displacement
[Bore x Stroke]
Net power *
(in accordance with SAE J1349)
Max. Net torque *
(in accordance with SAE J1349)
Oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
GC190
Length x Width x Height
Dry weight
Engine type
Displacement
[Bore x Stroke]
Net power *
(in accordance with SAE J1349)
Max. Net torque *
(in accordance with SAE J1349)
Oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
* The power rating of the engine indicated in this document is the net power
output tested on a production engine for the engine model and measured in
accordance with SAE J1349 at 3600 rpm (net power) and 2500 rpm (max.
net torque). Mass production engines may vary from this value. Actual
power output for the engine installed in the final machine will vary
depending on numerous factors, including the operating speed off the
engine in application, environmental conditions, maintenance, and other
variables.
10
.
Applicable to Emissions Durability
Period
50 hours (0–80 cc inclusive)
125 hours (greater than 80 cc)
125 hours (0–80 cc inclusive)
250 hours (greater than 80 cc)
300 hours (0–80 cc inclusive)
500 hours (greater than 80 cc)
1000 hours (225 cc and greater)
13.3 x 14.5 x 13.0 in
(337 x 369 x 331 mm)
25 lb (11.5 kg)
4-stroke, overhead cam, single cylinder
3
9.8 cu-in (160 cm
[2.5 x 2.0 in (64 x 50 mm)]
4.6 hp (3.4 kW) at 3,600 rpm
6.9 ft-lb (9.4 N•m) at 2,500 rpm
20 oz (0.58 l)
0.48 gal (1.8 l)
Forced air
Transistorized magneto
Counterclockwise
13.6 x 14.5 x 13.0 in
(345 x 369 x 331 mm)
29 lb (13.2 kg)
4-stroke, overhead cam, single cylinder
3
11.4 cu-in (187 cm
[2.7 x 2.0 in (69 x 50 mm)]
5.2 hp (3.9 kW) at 3,600 rpm
8.3 ft-lb (11.2 N•m) at 2,500 rpm
20 oz (0.58 l)
0.48 gal (1.8 l)
Forced air
Transistorized magneto
Counterclockwise
Tuneup Specifications
ITEM
Spark plug gap
Valve clearance
(cold)
Other specifications
Quick Reference Information
Fuel
Engine Oil
Carburetor
Spark plug
Maintenance
Wiring Diagrams
)
SPARK IGNITION
COIL
PLUG
)
ENGLISH
SPECIFICATION
0.028 ~ 0.031 in
(0.7 ~ 0.8 mm)
IN: 0.15 ± 0.04 mm
EX: 0.20 ± 0.04 mm
No other adjustments needed.
Type Unleaded gasoline with a pump octane
rating of 86 or higher (page 5).
Type SAE 10W-30, API SJ or later, for general
use. Refer to page 6.
Idle Speed 1,400 ± 150 rpm
Type BPR6ES (NGK)
Before each Check engine oil level. Refer to page 6.
use Check air filter. Refer to page 6.
First 5 hours Change engine oil. Refer to page 6.
Subsequent Refer to the maintenance schedule on
page 5.
IGNITION OIL LEVEL
SWITCH
SWITCH
MAINTENANCE
Refer to page 6.
See your authorized
Honda dealer
WITH OIL ALERT
OIL
ALERT
UNIT