Mx Onda MX-BB2510 Manual De Instrucciones página 28

1. Pour the ingredients into the blender jug or a suitable container and insert
the whisk.
2. Plug the appliance into a mains socket and press button A to start the
motor. Depending on the pressure exerted on this button, you can select
the desired speed.
3. Before removing the blender from the container, stop the motor and unplug
the appliance from the mains socket.
Chopper
The chopper will be very useful for grinding or mincing meat, cheese, fruits,
garlic, tomatoes, onions, nuts, etc. To use the appliance as a chopper you will
need to follow the steps below:
Important note:
The chopper bowl incorporates a safety closure system, to open the lid H
you must turn it counterclockwise until it is released from the safety closures
1. Carefully insert the blades I onto the shaft inside the bowl J.
2. Put the ingredients into the bowl, always taking care not to exceed the
maximum capacity. Consult the attached table to find out what is the
maximum recommended amount as well as the time necessary for the
correct preparation.
3. Replace the copper cover H and turn it clockwise until you hear a "click",
indicating that it is correctly seated.
4. Attach the motor assembly B to the cover H of the forage harvester as
described in the section Accessories assembly and disassembly.
5. Plug the appliance into a mains socket and press button A to start the
motor. Depending on the pressure exerted on this button, you can select
the desired speed. During the process it is convenient to hold the bowl J, it
is also recommended to use the apparatus discontinuously, that is, at
intervals. With this you will obtain better results in the chopping or grinding
of food and less effort on the motor.
8