Mx Onda MX-BB2510 Manual De Instrucciones página 26

Accessories assembly and disassembly
1. To extract an accessory on the sides of the motor
assembly B there are the eject buttons D, to
extract the accessory press both buttons D and
separate the accessory; removable foot C, rod
holder E or the cover of the mincer H.
2. To insert the accessory, make the central axis of
the accessory coincide in the hole of the motor
assembly B and then insert it until you hear a
"click", an indication that it is correctly retained.
Note:
During insertion or removal of the accessory, the mixer must remain
unplugged. Make sure that the accessory is perfectly attached to the motor
assembly.
Mixer operation
The mixer incorporates an electronic speed control device in order to adapt the
speed to each type of food.
The speed varies depending on the pressure of the speed control button A.
Gently press this button until the mixer starts to run at minimum speed, choose
the minimum speed for mixing or stirring dry food and select a higher speed for
mixing, shake or whisk thick foods.
If you want to increase the speed, continue pressing the speed control button A
until reaching the maximum (button pressed until the end of its travel), this
speed is suitable for making mayonnaise, whipping egg whites, porridges,
purees, sauces, etc.
6
1
1
1 2