Play Usb; Adjust Volume Level; Mute Sound; Listening To The Fm Radio - Vieta Home VH-IS1000 Manual Del Usuario

- If the connection is lost, display panel shows
"NO BT", follow the instruction above to pair
your device to the player again.
Listen to music from Bluetooth device
If the connected Bluetooth device supports

Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the
device through the player.
If the device also supports Audio Video

Remote Control Profile (AVRCP) profile, you
can use the player's remote control to play
music stored on the device.
1. Pair your device with the player.
2. Start play music via your device (if it
support A2DP)
3. Use supplied remote control to control
play(if it support AVRCP)
- To pause/resume play, press the
button.
- To skip to a track, press the
buttons.
Play from USB
1 Insert the USB device.
2 Press the FUNCTION button on main unit or
remote control to select the USB source.
3 Press the BF to start play.
- To pause or resume play, press the
button.
- To skip to the previous/next file, press the
buttons.
/

Adjust Volume Level

During play, press the +/- buttons to increase/
decrease the volume level.

Mute Sound

During play, press the MUTE button to mute
or restore sound. Press this button again or -/+
buttons to cancel the effect.
All manuals and user guides at all-guides.com

Listening to the FM Radio

Tune to a radio station
1
2
3
frequency indication starts to change, then

4
To tune to a weak station
Press
change step by step, press
until you find optimal reception.
BF
/
, H/G ,
 
Program radio stations automatically
Press and hold
auto programming



Program radios stations manually
1
2
3
Repeat above steps to program other stations.
Tune to a preset radio station
BF
1


2

3

Ensure that you have connected and fully
extended the supplied FM antenna
Press FUNCTION button repeatedly to select
TUNER.
H/G
Press and hold , , button till the
 
release the button.
TUNER tunes to a station with strong
reception automatically
repeat step 3 to tune to more stations.
, H/G , button, the frequency indications
 

BF button for seconds to activate
AUTO is displayed briefly
All available stations are programmed in the
order of waveband reception strength
The first programmed radio station is
broadcast automatically
Tune to a desired radio station.
Press BF button to activate programming.
a station number is displayed and blinking

H/G
Use , , to change the station
 
number, press BF button to confirm
programming.
Press M/CLOCK button TWICE to enter
program list
Press M/CLOCK button once will display
current clock(if available)
the station number and station frequency
is displayed aalternately
H/G
Use , , button to change the station
 
number.
the station frequency will display followed
Press M/CLOCK to confirm the selection.
if you didn't press M/CLOCK button
to confirm, set will tune to the station
currrent displayed in 4 seconds
H/G
, , repeatedly

19