Tabla de contenido
Idiomas disponibles
Idiomas disponibles
inspected by qualified personnel at regular
intervals in order to detect and resolve any
fatigue in material joints and screw connections
at an early stage.
Tighten all screw connections to the specified
ȫ
tightening torque (see manufacturer's
specifications).
Only the connecting hardware supplied by the
ȫ
manufacturer is allowed to be used.
The forces and loads specified by the
ȫ
manufacturer must be observed. The product
is only allowed to be assembled by qualified
personnel.
Screw connections must be properly checked
ȫ
after assembly.
Do not attach any large advertising signs or
ȫ
other components that may increase the wind
load.
2.2.2 Users
Read and follow all instructions concerning use
ȫ
of the product.
Do not carry out any activities that are only
ȫ
intended for experts, qualified personnel, and
service technicians authorised by the operator.
If there are no guardrails to prevent falls, the
ȫ
product must always be used in conjunction
with the appropriate fall protection PPE.
2.2.3 General safety instructions
Use the handrails when climbing up the stairs.
ȫ
The product may only be accessed via the
ȫ
access point provided (e.g. stairs, ladder).
Climb up slowly and without rushing.
Keep your eyes on the steps when descending
ȫ
a staircase steeper than 45°.
No-one is allowed to remain between the cross
ȫ
and diagonal braces of the platform unless for
maintenance and repair purposes.
Step on the product only when the brake unit is
ȫ
engaged (applies to mobile products).
When moving the product, make sure that
ȫ
there is a clear path and always keep an eye on
it (applies to mobile products).
Always regulate the travel speed to ensure the
ȫ
product can be stopped at any time (applies to
mobile products).
Always move mobile products in the
ȫ
longitudinal or diagonal direction on a level,
unobstructed surface with sufficient load
capacity. Upon arrival at the desired location,
immediately secure them against rolling away.
Never move mobile products if there are
ȫ
persons, materials or tools on them.
Always move mobile products by manual force.
ȫ
Never use a tow vehicle or forklift for this
purpose. Avoid any impact with other objects.
Do not climb onto the guardrails.
ȫ
Do not lean your body against the guardrails.
ȫ
Do not exceed the specified permissible loads.
ȫ
Do not try to increase the working height by
ȫ
using ladders, boxes or other equipment.
Always distribute loads evenly on the platform.
ȫ
Do not place any objects on the stairs.
ȫ
Do not generate lateral loads, e.g. by swaying
ȫ
back and forth.
Do not attach cranes, hoists or other similar
ȫ
equipment to the product.
Do not jump on the stepping surfaces.
ȫ
Slippery substances (oils, greases, etc.) as well
ȫ
as ice and snow must be removed from the
stepping surfaces and guardrails before the
product is used.
3 OVERVIEW
3.1 Scope of delivery
The scope of delivery varies depending on the
order.
→ Before starting to assemble the product, check
whether all parts have been included and are in
perfect working order.
→ Use only original parts that are free from
defects when assembling the product.
→ If there are any missing, damaged or defective
parts, please contact the manufacturer or
dealer.
→ Observe the type plate.
3.2 Accessories
Some products have optional add-on parts or
accessories. They can be requested directly from
the manufacturer or dealer.
Original HYMER instructions for use | BA article no.: 21000008
05
Tabla de contenido
