Technical Data; Preparations At The Workplace - Hilti NCR 120-22 Manual De Instrucciones Original

3.7 Selecting the crimping dies
The tables to assist with selecting the crimping dies to be used can be found at the end of these operating
instructions.
4

Technical data

Rated voltage
Weight without battery
Max. crimping / pressing force
Crimping / pressing time
Max. permissible crimping capacity
Storage temperature
Ambient temperature for operation
4.1 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5

Preparations at the workplace

WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
WARNING
Risk of injury by incorrectly positioned crimping dies! Incorrectly positioned crimping dies can fly out like
projectiles and cause injuries.
▶ Before and during the crimping operation, make sure that the crimping dies are correctly positioned.
CAUTION
Risk of injury! The accessory tool may be hot and/or have sharp edges.
▶ Wear protective gloves when changing the accessory tool.
▶ Never lay down a hot accessory tool on a flammable surface.
Observe the safety instructions and warnings in this documentation and on the product.
8 English
NCR 120-22
21.6 V
16.3 lb
(7.4 kg)
27,000 lb
f
(120 kN)
8 s ... 9 s
Cu 750 MCM
Al 750 MCM
−4 ℉ ... 158 ℉
(−20 ℃ ... 70 ℃)
1 ℉ ... 140 ℉
(−17 ℃ ... 60 ℃)
2321722
NCR 120C-22
21.6 V
16.3 lb
(7.4 kg)
27,000 lb
f
(120 kN)
8 s ... 9 s
750 MCM
750 MCM
−4 ℉ ... 158 ℉
(−20 ℃ ... 70 ℃)
1 ℉ ... 140 ℉
(−17 ℃ ... 60 ℃)
21.6 V
See the end of these
operating instructions
1 ℉ ... 140 ℉
(−17 ℃ ... 60 ℃)
−4 ℉ ... 104 ℉
(−20 ℃ ... 40 ℃)
14 ℉ ... 113 ℉
(−10 ℃ ... 45 ℃)
*2321722*