Technical Data; Preparations At The Workplace - Hilti NUN 054 IE-A22 Manual De Instrucciones

3.5 Items supplied
Crimping / pressing and cutting tool, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.6 Selecting the crimping / pressing die
A table to assist with selecting the type of crimping / pressing die to be used can be found at the end of
these operating instructions.
4

Technical data

Rated voltage
Weight including B22⁄8.0 battery
Crimping time
Max. crimping / pressing force
max. cutting capacity (outside diameter) (NCT J
CUAL cutting jaws)
max. cutting capacity (outside diameter) (NCT J
ACSR cutting jaws)
Max. permissible crimping capacity
Storage temperature
Storage temperature
4.1 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5 Operation
5.1

Preparations at the workplace

CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
6 English
600 MCM Cu cable
750 MCM Al cable
477 MCM ACSR (Hawk)
guy wire (EHS)
Cu/Al cable
Cu
Al
21.6 V
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
−10 ℃ ... 45 ℃
(14 ℉ ... 113 ℉)
2188463
*2188463*
NUN 054 IE-A22
21.6 V
2.6 kg
(5.7 lb)
≈ 4 s
53 kN
(11,900 lb )
f
1 1/4 in (33 mm)
1 1/4 in (33 mm)
9/32 in (7 mm)
1 in (25 mm)
600 kcmil
350 kcmil
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)