Texi Master Plus Manual Del Usuario página 37

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
Water leakage at the joint
Water leakage at the sprayer
Crack of handle
Abnormal noises in the air
duct
Deformation of kettle
Extension and removal of the
supporting bar
No steam, but the indicator
is on
Alarm at the normal water
level
Without alarm when there is
water deficiency
Buttons in the screen out of
work
Malfunctioning remote
control switch handle
Check whether the sealing
ring is aging
Check whether the sprayer
is cracked
The sprayer is below
the normal level during
operation
Not well fixed or damaged
Check whether the air duct
is bent
The sprayer is below the
normal level
Check whether the water is
too hot
False operation
The steam generator is
burnt.
The relay is out of work or
there is water deficiency.
The float is under water or
damaged.
Machinery water tank
internal within too much dirt
Micro-computer malfunction
Reset is necessary.
Internal battery capacity low
Texi Master Plus
Replace the sealing ring.
Fasten the joint of the air
duct.
Replace the sprayer.
Raise the sprayer and
straighten the air duct.
Re-buckle the handle or
replace the handle.
Straighten the air duct.
Raise the sprayer.
The kettle can be either used
or replaced.
Insert it again.
Professional maintainer is
suggested to check or add
water.
Pull out of the float or
replace it.
Cleaning the water tank
Professional maintainer
suggested.
Power off.
Then plug in.
Replace handle low internal
battery
EN
37
Tabla de contenido
loading

Productos relacionados para Texi Master Plus

Tabla de contenido