How To Operate - ProKlima FDD20-5060BR5 Manual De Instrucciones

All manuals and user guides at all-guides.com
When you empty water from a water tank
1.Remove water tank from the dehumidifier.
2.Hold the tank by the handle and carry it gently.
.Tilt the tank to the direction as shown.
3
and slowly empty the water out of the tank.
4.Set the tank in the dehumidifier.
After the dehumidifying operation, water is
collected in the water tank. When the tank is full
of water, the dehumidifier stops operating
automatically and the buzzer sounds.
The buzzer sounds for 20 seconds when the tank is
taken out during the operation.

How to Operate

Your dehumidifier will stop automatically after the hours set by the timer (0H to 24H)
In any mode, you can press "TIMER" switch to set the timer 0H
Plug in the dehumidifier to an outlet.
If the water is full of water indicator light, the rest are not displayed
Make sure that the water tank is set properly.
Press " " switch .
" "mode lamp
dehumidification
Set the unit to the desired operation by pressing "
Every timer you press the "mode"
Note
will light up.
switch, the mode select lamps light up in turn as
12
Handle
to 24H.
.
" switch .