Becken BWM5379WH Manual De Instrucciones página 15

Removing transport bolts
Warning!
• Transport bolts must be removed from the back before using the machine.
• Please make sure you keep the transport bolts in a safe place as you
will need them again if you move the unit.
To remove the bolts please proceed
as follows:
1. Loosen all 4 bolts with a spanner and
then remove them.
2. Stop the holes with transport hole plugs.
3. Keep the transport bolts properly for future use.
Levelling the washing machine
Warning!
• The lock nuts on all four feet must be screwed tightly against the housing.
1. Please check if the legs are closely attached to the cabinet. If not,
turn them to their original positions and tighten the nuts.
2. Loosen the lock nut and turn the feet until it closely contacts with
the floor.
3. Adjust the legs and lock them with a spanner, making sure the
machine is steady.
Washing Machine | Lavadora | Máquina de Lavar Roupa
Raise Lower
EN
Lock
nut
Foot
15