Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CLEANING
•
Turn off the power switch and wait until the motor completely stops.
•
With dry hands, unplug the power cord from electrical outlet.
•
Disassemble the machine. (See disassembly instructions.)
•
Clean all other parts in warm, soapy water. A mild detergent is recommended. Rinse well and dry
thoroughly.
•
All components are dishwasher safe with the exception of the base. Do not use in European Import
or a Commercial dishwasher.
•
Wipe base with a soft damp cloth or sponge. Do not submerge base in water. Do not spray with
water or any other liquid. Base is not dishwasher safe.
•
To clean the filter and blade, hold them under warm running water. Use a soft-bristled dish washing
brush gently to completely clean pulp from filter. Rinse the filter from the outside under running
water.
•
Dry components thoroughly then assemble the machine and turn the power on to spin out any
excess water.
•
Make sure unit and parts are completely dry then store in a cool dry place.
TROUBLESHOOTING
This list is made to help you solve common problems that may occur in the use of the unit. Check these
points before asking for help to authorized technical service personnel.
PROBLEM
The motor does not run after being switched on
The motor is running with loud noise and shaking
The motor overheats causing the power to
automatically shut off
Juice splashes from the rim of the receptacle
P-10
All manuals and user guides at all-guides.com
CAUSE AND SOLUTION
•
Check to see if unit is plugged in
•
Locking bar is not locked in place properly.
•
Check if all parts are assembled properly.
•
Check if there is any residue left between blade
and receptacle.
•
Check that all parts are assembled properly and
in the correct position.
•
Juicing overripe fruit may result in too much pulp
and will clog the filter. Turn machine off and
clean the filter.
•
The motor needs to warm up for 10 seconds
before use.
•
The fruits and vegetables may be soft or
overripe.
•
There may be too much pulp in the filter. Turn
machine off and clean the filter.
•
Motor stops running due to the built-in feature,
the overheat safety control.
•
This is normal.
CIRCUIT DIAGRAM
Power Switch
Power
350 Watts
Voltage
AC 110V/60Hz
Limited Switch
P-11
Capítulos
Tabla de contenido
Solución de problemas
