Electric Connection; Start-Up; Buttons - S&P CR-TEMP Manual Del Usuario

3.2. ELECTRIC CONNECTION

Supply (Terminals 6-7):
Class:
ON/OFF relay (Terminals 4-5):

4. START-UP

4.1. BUTTONS

If screen's illumination is off, the fi rst press on any key will turn it on. Once the
display is illuminated, buttons functionalities are described below. The screen
come back to standby mode after 4 minutes of inactivity.
Note: If [MODO] and [ ] keys are pressed at same time when powering voltage to
the controller, it will return to default values with [dEFEC] message on screen.
22
100-250V 50/60Hz
II
5A (resistive)
Short press: On / Off relay activation /
deactivation
Long press: Timer activation /
deactivation
Short press: Manual control activation
/ deactivation
Long press: Confi guration menu (CF)
access. It allows setting of date [HorA] ,
timer [Pro9] , parameters [PAr] and
reset [rESEt]
Auto mode: Increase temperature set
point (0-60°C)
Manual mode: Output relay activation
Auto mode: Decreases temperature
set point (0-60°C)
Manual mode: Output relay deacti-
vation