General; Warnings; Safely Regulations And "Ce" Marking; Reception And Storage - S&P CR-TEMP Manual Del Usuario

1. GENERAL

Thank you for purchasing this appliance. It has been manufactured in full com-
pliance with applicable safety regulations and EU standards.
Please read this instruction book carefully, as it contains important information
for your safety during the installation, use and maintenance if this product. Keep
it at hand for future reference. Please check that the appliance is in perfect con-
dition when you unpack it, as all factory defects are covered by the S&P gua-
rantee.

1.1. WARNINGS

This manual contains all the information for all exposed, in order to prevent
possible damage to people and / or things, because of a defective handling or
maintenance. All maintenance interventions (ordinary and extraordinary) must
be carried out with the device off and disconnected power supply.
Before supplying power to the terminal, check that the line voltage corresponds
to that indicated on the nameplate of the unit.

1.2. SAFELY REGULATIONS AND "CE" MARKING

S&P technicians are fi rmly committed to research and development of ever more
effi cient products and in compliance with current safety regulations.
The instructions and recommendations given below refl ect current regulations,
principally regarding safety, and therefore are based on compliance with general
regulations. Therefore, we recommend all people exposed to hazards to strictly
follow the safety regulations in force in your country.
S&P will not be held liable for any possible harm or damage caused by non-com-
pliance with the safety regulations, as well as caused by modifying the product.
The CE mark and the corresponding declaration of conformity are proof of the
product's conformity with current EU regulations.

1.3. RECEPTION AND STORAGE

When receiving the device, the unit will be unpacking and check the integrity, any
fault may be indicative of damage. It will check and verify that no missing items.
The product should be kept away from weather inclement and spaces where it
can receive hits during transport and storage.
Accepted temperature:
Permissible relative humidity:
-20°C to +60°C
30 to 95% without condensation
17