Krups F286 Manual Del Usuario página 6

. T F
OASTER UNCTION
• Open the door.
• Place your toast directly on the grill.
• Press the "select" button and choose the
"toast" function.
The light will come on.
• Press the " " or "
index in the display and choose the required
darkness of your toast.
The time is pre-programmed as follows :
Abbreviation on control
panel
Preprogrammed time
Display
• Press the "start" button to start toasting.
At the end of toasting, you will hear five
beeps and the display will return to clock
mode. The toaster stops.
You can interrupt the operation before the end
of the cycle by pressing on the "stop" button.
Notes:
• Try your toaster out on a few slices the first
time that you use it. Increase the darkness
for thick or frozen slices of bread.
• Allow for the fact that a single slice of bread
toasts faster than several slices.
• When you toast several loads of thin slices,
we recommend that you reduce the
darkness and watch carefully to make sure
that your toast doesn't burn. If it does, stop
the cycle immediately by pressing on the
"stop" button.
• If you want to toast a slice of bread that has
already been toasted to make it darker, put
the (-) index to "light", and monitor the
cycle carefully.
Note: recommendations for toast (3).
. O B
VEN AKING
• Press the "select" button and choose the
"bake" function.
The light will come on.
" button to move the
LT MED DK
light medium dark
4 min 5 min 6 min
0 :03 0 :04 0 :05
• Press the "display select" button and choose
the Temperature "°F" between 100 to 500°F
in steps of 25°F
The "°F" light will come on
• Press the " " or " " button to increase or
reduce the temperature (which is pre-
programmed at 500°F)
• Press the "display select" button and choose
the baking time ("timer").
The light will come on.
• Press the " " or "
or reduce the baking time, pre-programmed
at 30 minutes.
• Press the "start" button to start baking.
After a few minutes, a beep will indicate that
the pre-heating is over.
• Put your food on the grill using an
appropriate dish.
You will hear five beeps when baking is
finished and the display will return to clock
mode. The appliance will switch itself off.
. B
ROIL
• Place your food on the assembled broiler
and tray.
There are two possible positions (4)
depending on the position of the broiler on
the dish.
• Place the complete assembly on the grill,
leaving a clearance of at least an inch from
the upper heating elements.
• Close the door.
• Press the "select" button and choose the
"broil" function.
The light will come on.
• Press the "display select" button and choose
the temperature (°F).
The light will come on.
The "HI" symbol will appear in the display
(High temperature setting).
• If you wish, press the " " button to reduce
the temperature. The "LO" symbol will
appear in the display.
• Press the "display select" button and choose
the baking time ("timer") function.
The light will come on.
" button to increase
9