Manuales relacionados para Westinghouse Barnett Smart B-WH2
Resumen de contenidos para Westinghouse Barnett Smart B-WH2
- Página 1 ETL-ES-Barnett Smart B-WH21 OWNER'S MANUAL MANUAL DEL USUARIO Barnett Please write model number here for future reference: / Por favor, incluya el número del modelo aquí para futura referencia: Net Weight: Peso Neto:...
-
Página 2: Safety Tips
ETL-ES-Barnett Smart B-WH21 SAFETY TIPS OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT TO OUTLET BOX MARKED 'ACCEPTABLE FOR FAN SUPPORT OF 35 LBS (15.9 KG) OR LESS' AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX AND/OR SUPPORT DIRECTLY FROM BUILDING STRUCTURE. -
Página 3: Consejos De Seguridad
ETL-ES-Barnett Smart B-WH21 CONSEJOS DE SEGURIDAD HAGA LO SIGUIENTE: LEA Y GUARDE ESTAS INSTRUCCIONES ADVERTENCIA: PARA REDUCIR EL RIESGO DE INCENDIO, DESCARGA ELÉCTRICA O HERIDAS GRAVES PERSONALES, MONTE EN UNA CAJA DE EMBUTIR ROTULADA “ADECUADA PARA VENTILADORES DE 35 LBS (15,9 KG) O MENOS”... - Página 4 ETL-ES-Barnett Smart B-WH21 FEATURES CARACTERÍSTICAS DOWNROD INSTALLATION INSTALACIÓN CON VARILLA VERTICAL For normal ceilings COMBO-BLADE Combo-Blades feature two high quality finishes on one blade. Select the one that best complements Para techos normales your decor, or change the style with just a flip of the blade. NOTE: Combo-Blade finishes vary, depending upon model.
-
Página 5: Parts/Reference List / Lista De Piezas Con Letras De Referencia
ETL-ES-Barnett Smart B-WH21 PARTS/REFERENCE LIST / LISTA DE PIEZAS CON LETRAS DE REFERENCIA Mounting Bracket (attached on the canopy) Soporte de Montaje (adjunto al dosel) Canopy Dosel Down rod (with hang ball) Varilla Vertical (bola de enganche) Coupling Cover Cubierta del Acoplamiento Motor Motor Light Kit... - Página 6 ETL-ES-Barnett Smart B-WH21 PARTS/REFERENCE LIST / LISTA DE PIEZAS CON LETRAS DE REFERENCIA PARTS FOUND IN HARDWARE BAG (*SHOWN ACTUAL SIZE) PIEZAS ENCONTRADAS EN LA TORNILLERIA (* SE MUESTRA EL TAMAÑO REAL) W (x 2) U (x 16) V (x 16) Lock Washers 5/16"...
- Página 7 ETL-ES-Barnett Smart B-WH21 PREPARING FOR INSTALLATION ANTES DE LA INSTALACIÓN Use metal outlet box suitable for fan support (must support 35 lbs). Before attaching fan to outlet box, ensure the outlet box is securely fastened by at least two points to a structural ceiling member (a loose box will cause the fan to wobble).
- Página 8 ETL-ES-Barnett Smart B-WH21 MOUNTING BRACKET INSTALLATION INSTALACIÓN CON SOPORTE DE MONTAJE Loosen but don’t remove the screws at the bottom of canopy; Install mounting bracket to outlet box in ceiling using the screws and washers remove the mounting bracket from the canopy. provided with the outlet box.
- Página 9 ETL-ES-Barnett Smart B-WH21 NORMAL DOWNROD OPTION OPCIÓN CON VARILLA VERTICAL NORMAL Remove clamp pin (1) and cross pin (2) from downrod (3). Quite el pasador tipo prensa (1) desde el pasador transversal (2) de la vara (3).
-
Página 10: Downrod Installation Instalacion De La Varilla Vertical
ETL-ES-Barnett Smart B-WH21 DOWNROD INSTALLATION INSTALACION DE LA VARILLA VERTICAL Loosen (but do not remove) the set screws from the down rod coupling. Place downrod assembly into canopy and coupling cover. Insert motor wires through the downrod and insert the downrod into the downrod coupling. Make sure to align the hole in the downrod with the hole in the downrod coupling. Install cross pin (1) removed in step 5 through coupling and downrod. - Página 11 ETL-ES-Barnett Smart B-WH21 WIRING OPTIONS MOUNTING MONTAJE OPCIÓN DE CABLEADO Bare Copper or Green R.F. Antenna Antenna R.F. Cobre Pelado o Verde Green Green Verde Verde WI-FI Antenna Antenna Wi-Fi Carefully lift fan assembly onto mounting bracket. Rotate fan until notch on downrod ball (1) engages the ridge on the mounting bracket (2).
- Página 12 ETL-ES-Barnett Smart B-WH21 WIRING OPTIONS SECURE TO CEILING OPCIÓN DE CABLEADO ASEGURE EL VENTILADOR AL TECHO Raise the canopy up and align the keyholes on the bottom of the canopy with the 2 screws on the bottom of mounting bracket. Rotate the canopy to engage the keyholes with the protruding screws.
- Página 13 ETL-ES-Barnett Smart B-WH21 BLADE INSTALLATION INSTALACIÓN DE LAS ALETAS Attach the blade bracket assembly to the motor as shown, and use the provided motor screws to tighten the blade brackets to the motor. Attach blade brackets to blades using the blade bracket screws (1) and fabric Note: for your convenience motor screws may be pre-installed to the motor.
- Página 14 ETL-ES-Barnett Smart B-WH21 LIGHT FIXTURE INSTALLATION INSTALACIÓN DEL JUEGO DE LUZ Remove the screws (1) from the light kit mounting plate (2) and keep Attach the upper cage (1) to light kit cover (2) using three screws (3) provided. them for use with light kit installation on the step #17. Retire los tornillos (1) de la placa de montaje del juego de luz (2) y guar- Monte la jaula superio (1) en la cubierta del juego de luz (2) con los tres tornillos (3) dalos para uso en paso #17.
- Página 15 ETL-ES-Barnett Smart B-WH21 LIGHT FIXTURE INSTALLATION INSTALACIÓN DELJUEGO DE LUZ Carefully raise the lower cage onto the upper cage, make sure to align the iron wires between both upper and lower parts of the cage. Pull the clamp (1) from the lower shade over the upper cage so that it engages the iron wire (2) of the upper cage until it snaps into place.
- Página 16 ETL-ES-Barnett Smart B-WH21 LIGHT FIXTURE INSTALLATION INSTALACIÓN DEL JUEGO DE LUZ To reverse the direction of the blades, slide the reverse switch (located on the switch hous- ing) to the opposite side. Note: Make sure slide switch is pushed firmly to one side or the Connect the plug from the light kit (2) to the plug from the ceiling fan housing (1) other.
- Página 17 ETL-ES-Barnett Smart B-WH21 HOW TO OPERATE YOUR CEILING FAN INSTRUCCIONES PARA OPERAR SU VENTILADOR DE TECHO Mount the smart remote transmitter holder onto the wall using screws provided. Place the smart remote transmitter into the holder. Monte el soporte para el transmisor control inteligente a la pared usando los tornillos incluidos. Coloque el transmisor control inteligente en el soporte.
- Página 18 ETL-ES-Barnett Smart B-WH21 HOW TO OPERATE YOUR CEILING FAN INSTRUCCIONES PARA OPERAR SU VENTILADOR DE TECHO The remote buttons function as follows: (1) Fan speed: = High speed = Medium-high speed = Medium Speed = Low Speed Button: Turn the fan off - Light On/Off –...
- Página 19 ETL-ES-Barnett Smart B-WH21 HOW TO OPERATE YOUR CEILING FAN INSTRUCCIONES PARA OPERAR SU VENTILADOR DE TECHO Restore electrical power to the outlet box by turning on the electricity at the main fuse box. To make the fan operational, open battery door by pressing and sliding down the battery door. Install two AAA 1.5V batteries (included) into the hand-held smart remote transmitter(if not used for long periods of time, remove the batteries to prevent damage to the smart remote transmitter).
- Página 20 ETL-ES-Barnett Smart B-WH21 HOW TO OPERATE YOUR CEILING FAN INSTRUCCIONES PARA OPERAR SU VENTILADOR DE TECHO Restaure la energía eléctrica a la caja de embutir encendiendo la electricidad en la caja de fusibles principal. Para que el ventilador funcione, abra la puerta de la batería presionando y deslizándola hacia abajo.
- Página 21 ETL-ES-Barnett Smart B-WH21 CONNECTING TO THE BOND RECEIVER CONECTARSE AL RECEPTOR DE BOND • Ensure the fan and receiver are receiving power from the house supply by using the remote control to turn the fan and light on and off. •...
- Página 22 ETL-ES-Barnett Smart B-WH21 Appendix for alternate installation options EXTENDED DOWNROD OPTION (from page# 22) Apéndice para opciones de instalación alternativas OPCIÓN CON VARILLA VERTICAL MÁS LARGA (desde la página # 22)
- Página 23 ETL-ES-Barnett Smart B-WH21 EXTENDED DOWNROD OPTION OPCIÓN CON VARILLA VERTICAL MÁS LARGA Loosen the downrod ball (1) from downrod (2) by removing the screw Slide downrod ball (1) off of downrod and remove pin (2). (3). Deslice la bola de la varilla vertical (1) hasta separarla de la varilla vertical y Afloje la bola de la varilla vertical (1) de la varilla vertical (2) quitando quite el pasador (2).
- Página 24 ETL-ES-Barnett Smart B-WH21 EXTENDED DOWNROD OPTION OPCIÓN CON VARILLA VERTICAL MÁS LARGA Re-install pin into extended downrod, and slide downrod ball up to the top of the downrod. Re-install the set screw to secure ball to downrod. Note: Some extended down- rods have a pre-drilled set-screw hole.
-
Página 25: Operation And Maintenance
ETL-ES-Barnett Smart B-WH21 OPERATION AND MAINTENANCE Operation Turn on the power and check operation of fan. Speed settings for warm or cool weather depend on factors such as room size, ceiling height, number of fans and so on. The slide switch controls direction, forward or reverse. Warm weather/down position - (Forward) Fan turns counterclockwise direction. -
Página 26: Operación Y Mantenimiento
ETL-ES-Barnett Smart B-WH21 OPERACIÓN Y MANTENIMIENTO Operación Encienda el ventilador y verifique su funcionamiento. Las velocidades para clima cálido o frío dependen de factores como el tamaño de la habitación, la altura del ventilador, el número de ventiladores, etc. El interruptor deslizante controla la dirección, hacia adelante o hacia atrás. Clima cálido/posición hacia abajo - (Adelante) El ventilador gira en sentido contrahorario. -
Página 27: Troubleshooting Guide
ETL-ES-Barnett Smart B-WH21 If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these TROUBLESHOOTING GUIDE installation errors may be mistaken for defects. If you experience any faults, please check this troubleshooting chart. If a problem cannot be remedied, please consult with your qualified electrician and do not attempt any electrical repairs yourself. - Página 28 ETL-ES-Barnett Smart B-WH21 Si tiene dificultades para hacer funcionar su nuevo ventilador, podría ser a causa del armado, instalación o cableado incorrectos. En algunos GUÍA PARA SOLUCIONAR PROBLEMAS casos, estos errores de instalación podrían ser confundidos con defectos. Si experienca algun fallo, consulte esta guía para solucionar problemas.
-
Página 29: Garantía
If replacement product is not available through seller, please contact www.westinghouselighting.com/contact-us. GARANTÍA Este ventilador de Westinghouse Lighting se ofrece con una garantía limitada de por vida para el propietario original frente a defectos de material y de mano de obra. Esta garantía sustituye cualquier otra garantía expresa o implícita. - Página 30 ETL-ES-Barnett Smart B-WH21...
- Página 31 ETL-ES-Barnett Smart B-WH21...
- Página 32 ETL-ES-Barnett Smart B-WH21 Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A. www.westinghouselighting.com and Westinghouse are trademarks of Westinghouse Electric Corporation. Used under license by Westinghouse Lighting. All Rights Reserved. Made in China...