Fixture Assembly & Installation; Assembling The Frame - PHOTONTEK XT 1000W CO2PRO Manual

6.1 Fixture assembly & installation
Please take care when assembling fixture and ensure all connections are true and secure
6.1.1 Assemble the frame
Connect Frame B to support frame end
near LED driver power output & dimming
female connectors.
Note the direction when installing; the LED driver mounting bracket is on top when the fixture is hung.
6.1.2 Connect & disconnect the driver
The LED driver is fixed to the mounting bracket with four retention screws through bracket into driver base plate. For greater
flexibility the driver can be disconnected from the fixture and used remotely using Photontek 5m LED driver extension cables
(sold separately).
To connect driver output and dimming to fixture; ensure the power and dimming self-locking male connectors are correctly aligned
with corresponding female connectors on driver and push together until click-locked.
To disconnect; turn male connector anti-clockwise to unlock and pull apart from female.
Connect Frame A and B to the support
frame by pressing button on frame
connector and inserting into support
frame socket and lock. Ensure button
clicks into hole socket to lock.
LED driver mounting
retention screws