Installation - PHOTONTEK XT 1000W CO2PRO Manual

Do not use abrasive materials or aggressive cleaning agents to clean the LED fixture as this may damage the
•
secondary optics. Instead use a clean dry fabric/cloth.
• Do not use the LED fixture near flammable, explosive or reactive substances. The LED fixture can reach tempera-
tures of 40ºC.
• Do not use sulphur vaporizers or water misters.
• The installation and use of the LED fixture is the responsibility of the end user. Incorrect use or installation can
lead to failure and damage to the LED fixture. Damage to the LED fixture and electronic circuitry as a result of
incorrect installation and use revokes the warranty.
5. CONTENTS
1X DIMMING CONTROLLER 0 -10V
Connects to SIGNAL IN
connector on Frame B
1x LED FRAME B
Contains power inputs & dimming
self-locking male connectors
and control signal ports'
2
•
1 X 120V POWER SUPPLY CORD
•
2 X METAL CABLE HANGERS
•
1X MANUAL

6. INSTALLATION

Mounting and installing the LED fixture must be in accordance with the applicable local laws and regulations.
WARNING!
The installer is responsible for correct and safe installation.
WARNING!
Ensure the local cabling can support the voltage and current requirements of the LED fixture.
WARNING!
Avoid coiled cords and keep mains leads separated to help prevent electromagnetic interference.
WARNING!
Do not connect or disconnect the LED fixture under load.
WARNING!
1x LED DRIVER
Contains power output & dimming
female connectors and power supply
input male connector'
4
5
Fig4. Fixture components
1x LED FRAME A
1
1x SUPPORT FRAME
3
Contains driver
fixing bracket
10x LED LIGHT BAR