Directions For Use; Troubleshooting - Martellato 50PR002 Manual De Uso Y Mantenimiento

6.0 DIRECTIONS FOR USE

Plug the unit into a 230V single-phase power socket
AC
Press the ON switch and check that the power ON light comes on (if it does not,
check that the unit starts heating anyway once you have turned the thermostat: in this
case, have the faulty light bulb replaced).
Set the knob to the desired power level.
Wait a few minutes until the operating temperature is reached, signaled by the rele-
vant indicator light going off.
Proceed with hot working
At the end of use, allow the top to cool before putting it away
If you want to move the equipment (for example to clean), wear thermal gloves EN
407.
14
DPL50PR002 - ENGLISH

7.0 TROUBLESHOOTING

FAULT POSSIBLE CAUSE
A The light does not come on when No power to 230V
the switch is turned on during the /240
AC
heating phase. power socket
Electrical system protection has
tripped (thermal-magnetic circuit
breaker, circuit breaker, residual
current device).
Faulty bulb.
B The device and top surface of No mains power
the appliance remain cold to the
touch.
Check the thermostat
temperature setting.
Break in heating element.
Break in power cable.
C The device fails to reach the re- Intermittent contact in socket /
quired temperature. pug connection.
Intermittent contact inside the
appliance.
REMEDY
(110 1. Unplug the power cable.
AC AC
)
2. Check that the fault is not
attributable to the device.
3. If it is a fault with the electrical
system, call in a professional
electrician to make the necessary
repairs.
4. Plug the appliance back in and
turn it back on.
5. If it is the device that has
caused the electrical system
protection to trip, contact the
dealer or manufacturer to arrange
for replacement or repair as
necessary.
Contact the dealer or
manufacturer to arrange for
replacement or repair as
necessary.
Proceed as indicated in point A
Contact the dealer or
manufacturer to arrange for
replacement or repair as
necessary.
Check that the plug is inserted
correctly into the mains socket.
Unplug the device from the
power socket immediately.
Contact the dealer or
manufacturer to arrange for
replacement as necessary.
DPL50PR002 - ENGLISH
15