Tabla de contenido
7. Lock the drawbar into position by inserting a 3/8" x 3"
hitch pin (20) into the center hole and securing it with
20
19
8. Attach the hitch bracket (12) and straight hitch bracket
(13) to the drawbar using two 5/16" x 2-1/2" hex bolts
9. Assemble a 3/8" x 3" hitch pin (35) and two 3/4"
spacers (22) to the hitch brackets. Secure them in
15
35
12
22
13
21
18
All manuals and user guides at all-guides.com
FIGURE 5
FIGURE 6
5
10.
11.
1
12. Install a rear hopper tube (11) onto the ends of the
lower hopper tubes (10) making sure the holes in the
13. Secure the rear hopper tube (11) to the lower hopper
tubes (10) with two 1/4" x 1" curved head bolts (26)
NOTE: Hopper bag (3) not shown for clarity.
24
10
26
10
FIGURE 7
Hole must face up
11
24
10
FIGURE 8
26
Tabla de contenido
